Quick Answer
Water that stands in a lot after a storm has a cause, and each cause has a different fix: a blocked catch basin, a downspout draining onto turf, a low spot, or a failed pipe. Photograph the water on the day, write the cause down, and schedule installs in the dry season, so the owner sees a plan.
Why does water stand on a commercial property after a storm?
Because South Florida ground is flat, the soil is sandy, and a summer afternoon storm drops more rain than the site can move in the time it has. You see the result at the entrance, along a walkway, or in the same parking row, and then the tenant photos reach your inbox.
The owner’s question follows within a day: what are you doing about it? If you have no cause and no plan, you are answering “I’ll look into it” again. A repeat puddle reads to an owner as a property that is not being managed, even when the real cause is one clogged grate.
For property managers: our free Guide to Managing Landscaping Vendors has 93 pages and 11 templates for running your landscape vendor. Get the free guide
Is it a clogged drain or a design problem?
Start with the cheapest check, which is the catch basin or grate nearest the water. Leaves, palm debris, mulch and grass clippings block them, and a blocked basin looks exactly like a drainage failure from the parking lot.
A crew on routine visits can check and clear those drains and report which ones were blocked. That report matters because it tells you, in writing, whether the water left after the drain was cleared. If it did, you had a maintenance problem. If water still stands at the same spot after the next storm, you likely have a design problem.
Here are the causes we see most often on commercial properties:
- A blocked catch basin or grate
- A downspout that discharges onto turf or a bed
- A low spot or settled sod
- Compacted soil that will not take water
- A crushed or disconnected drain pipe
- Runoff arriving from higher ground
- Extra water from irrigation overspray, which adds to the problem but rarely is the whole of it
Green Image is a commercial landscape company that has maintained and installed landscapes on commercial properties across Palm Beach, Broward and Miami Dade for 14 years. On a routine inspection at one industrial portfolio, we caught a failing canal pump that fed site irrigation and drainage and repaired it the same day, before the tenant opened. The details are in the case study, K1 Speed at Faropoint 7970.
Which fix matches which cause?
Each cause needs its own fix, so paying for the wrong one leaves the water where it was. Matching them keeps you from approving a larger job than the problem needs.
- Low spot collecting surface water: a catch basin takes the water from the low point. See our catch basins page.
- Water soaking into a strip of lawn or beside a building: a French drain collects it and carries it off. See French drains.
- Roof water landing on turf or a bed: downspout drainage moves it away from the building.
- Settled or sunken areas: regrading or new sod brings the surface back to a grade that sheds water.
- Crushed or disconnected pipe: the pipe is repaired or replaced.
The full range of work sits under commercial drainage services. Which one applies depends on what the walk finds, so we name the cause before we name the fix.
What should you photograph and write down after a storm?
Photograph the water on the day it happens, because by the next morning it has drained and you have nothing to show the owner. Your photos turn a tenant complaint into a documented issue with a plan attached.
For each spot, record:
- The date and time of the photo
- The location, such as the third row from the entrance
- The nearest drain, and whether it looks blocked
- How long the water stood, if you can check
After the work is done, photograph the same spot after the next storm. A before and after from one location is something an owner can read at a glance.
Our own documentation follows the agreed reporting plan for each property. You can see what a report looks like in our sample visit report.
When does a drainage change need an engineer or approval?
When a fix changes where water leaves the property, the property’s engineer or the city or county may need to approve it. Confirm that before work starts, because a change that sends water onto a neighbor’s land or into a public system is not yours or ours to decide.
That is why a drainage scope has to say who is responsible for those approvals. Engineering, surveying, permitting and municipal connections are not part of our scope unless they are separately included and performed by the appropriate professional. Ask early, since an approval that arrives after the work is scheduled pushes the job into the next rainy season.
Why is the dry season the time to install drainage?
The dry season gives you open ground, workable soil and no standing water, so a crew can dig, set pipe and restore turf before the rain returns. Install in the middle of the rainy season and the trench fills, work stops, and the tenant still sees the puddle.
The rainy season is ending, which makes this the time to plan. Get the cause documented, the scope written and any approvals confirmed, so the install can start when the ground allows it. Before the rains come back, walk the property again using our post on drainage inspections to do before the seasonal rains return.
What should the written drainage scope name?
A written scope should be something you can forward to the owner unchanged. That means it answers the questions the owner will ask before they ask them.
It should name:
- The location of each drain or pipe
- The cause found at each location
- The fix proposed for that cause
- What is excluded, such as engineering, permitting or work outside the named areas
- Photos of each problem area
Clear scopes with named exclusions are how we write proposals, so you can compare them side by side and defend the choice.
Related reading
- Drainage and Erosion Control Services
- Catch Basin Installation for a Commercial Property: Who Owns the Lot When It Floods Again?
- Drainage Inspections to Do Before the Seasonal Rains Return
- Download the Property Manager’s Guide to Managing Landscaping Vendors
FAQ
Why does the same spot flood after a storm?
The same spot floods because the cause is still there, whether that is a blocked basin, a low point, or a pipe that no longer carries water. Clearing the nearest drain first tells you which it is.
Can a landscape crew clear catch basins?
Yes, a crew can check and clear catch basins and grates on routine visits and report which ones were blocked. That report gives you a written starting point for any larger fix.
Do I need a French drain or a catch basin?
A catch basin fits water collecting at a low spot on the surface. A French drain fits water soaking into a strip of lawn or running along a building.
Who approves a drainage change?
It depends on whether the change affects where water leaves the property. Your property’s engineer or the city or county may need to approve it, so confirm before work starts.
What if the water still stands after the work?
Photograph the same spot after the next storm and compare it with your first photos. If water still stands, the cause was not the one first named, and the written record shows what to check next.
Get the free guide, sent to your inbox.



