Quick Answer
One vendor should install the catch basin on your commercial lot, from finding the low point to restoring the sod and pavers. When 3 trades split that work, nobody owns repeat flooding, and you end up explaining it to the owner. Ask for one name on the whole job.
Who should install a catch basin on a commercial property?
The vendor who will finish the job and come back to check it should install it, whether that is a drainage contractor or your grounds company. What matters is that one company owns the result, because the owner will email you, not the trades, when the lot floods again.
Here is how that plays out when the work is split. A drainage contractor digs and sets the basin. A landscaper replants weeks later. A paver contractor resets the surface after that. Then it rains, water stands at the curb, and each one says the problem sits in another company’s piece.
Green Image is a commercial landscape company that has maintained and installed landscapes on commercial properties across Palm Beach, Broward and Miami Dade for 14 years. Drainage is part of that work, including catch basins, so the installer, the person restoring the surface and the maintenance crew can be the same company. You can see the scope on our catch basin installation and repair page.
For property managers: our free Guide to Managing Landscaping Vendors has 93 pages and 11 templates for running your landscape vendor. Get the free guide
Why does a lot flood again after a drainage fix?
A lot usually floods again for one of 3 reasons: the basin went in at the wrong spot, the surface settled over the pipe, or the grate clogged. Each one traces back to what happened after the first rain, not to the basin itself.
- Wrong spot. The basin was placed where the plans suggested water collects, not where it actually does.
- Settled trench. Sod and pavers sink over the pipe within a season, which can leave a dip that holds water next to a new basin.
- Clogged grate. Mulch, palm fronds, sod clippings and sand wash in at the grate and block it.
The third one surprises managers most. On South Florida lots, a new basin only keeps working if the maintenance crew checks the grate on regular visits. If the drainage contractor leaves and nobody else is told to look at it, the basin quietly stops draining, and the next hard rain tells you.
How do you find the low point before anyone digs?
Walk the lot during a hard rain or right after one, and photograph where water stands. That gives the installer real evidence, so the basin goes where water collects and not where it was assumed to.
Take pictures of the places tenants notice first:
- Curb lines along the parking rows
- Entrance walkways
- Loading areas
- The base of downspouts
Then have the installer meet you there and watch the water move before choosing a spot. A quote written from a dry parking lot is a guess, and you are the one who lives with the guess.
What does the work include beyond setting the basin?
A complete catch basin job includes finding the low point, setting the basin, connecting the drain pipe, and restoring the sod and pavers afterward. If a quote stops at the basin, ask who is doing the other three, because that is where the finger pointing between companies starts.
The restoration matters because trench lines settle. Sod and pavers sink over the pipe within a season, so the company that puts the surface back should be the one that comes back to check it. At Green Image that return visit is a self performed repair on our own accounts, so you are not chasing a second contractor to fix a dip. For a sense of how quickly we move on a drainage problem, see a same day repair at a West Palm Beach industrial property.
The pipe itself is drainage pipe, and Schedule 40 PVC where it is specified for the approved application. Whether a change to the stormwater system needs approval is a question for your civil engineer or the local permitting office.
What photos and records should you have before the trench closes?
You should have photos of the pipe run, the connection point and the basin before anyone fills the trench. Once the trench is closed, those photos are the only way to show what is underground, and you will want them if the owner asks what the drainage payment bought.
Keep them with the visit record under the agreed reporting plan, so the proof sits in one place with the date. Our sample daily job log shows what that kind of record looks like. Written scope should also name what is included and what is excluded, so a later dispute does not turn into a debate about who was supposed to do what.
How do you protect tenant parking and entrances during the work?
Stage the work in sections so tenants keep a usable parking row and a clear walk to the door while the trench is open. A tenant who cannot find a space calls you, and the call reaches the owner if you were not warned first.
A short written notice helps. It should tell tenants where work happens, which entrance stays open and when the area comes back. Send it before the first shovel goes in. When tenants hear it from you early, the call that would have gone to the owner never gets made.
When is a catch basin not the right answer?
A catch basin is the wrong fix when water comes from somewhere a basin does not reach. A good vendor tells you that before quoting the basin, even when the basin is the bigger job.
- Downspouts dumping at the building edge. Downspout drainage moves that water away at the source.
- A long, low stretch of ground that stays wet. A French drain may fit better.
- A lot that simply slopes the wrong way. Regrading may be the answer.
If the runoff problem is wider than one corner of the lot, our stormwater runoff solutions page lays out the options. The honest test is whether the vendor proposed something other than the basin after walking the property.
FAQ
Should a drainage contractor or my landscaper install the catch basin?
Choose whichever company will own the whole job, including surface restoration and later checks. If the digging and the replanting go to different companies, you carry the job of settling who is responsible.
How often should someone check the grate on a new catch basin?
The maintenance crew should check it on regular visits. Under our schedule that is weekly in the growing season and every other week the rest of the year, which is often enough to catch mulch or frond buildup before a storm.
Does installing a catch basin guarantee the lot will not flood?
No. A basin only moves water that reaches it. Site conditions, the slope of the lot and a clear grate all decide how well it works.
What should I ask the vendor before approving the work?
Ask who sets the basin, who connects the pipe, who restores the surface and who checks it afterward. If the answer is 3 different companies, you know where the finger pointing will start.
When one vendor holds all four pieces and keeps the photos, a flooded lot becomes a call to one company instead of an email you cannot answer.
Get a Quote: we walk your property and send a written proposal with photos within 72 hours.



